Looking for Professional Garage Door Services in Hazel Dell, WA?

Ryder Garage Doors, LLC

Whether it's residential or commercial garage door installations, or repair and maintenance, we get the job done right at a fair price.

(360) 843-7981

Our Services

Call Us

Get a FREE QUOTE

Garage Doors - Done Right.

As a family-owned garage door company, we understand how important it is to have a working garage door. It can help protect your valuables from the elements and, most importantly, keep them safe. We use our experience and know-how to provide our clients in the Vancouver, WA area with exceptional local garage door repair and installation services.

Experience Matters.

With nearly two decades of experience, Ryder Garage Doors, LLC offers new garage door installation and local garage door repair service to clients in the Vancouver, WA area. So whether you need your garage door repaired or a brand new garage door installed, our skilled contractors can help. So why not call us now for a free estimate from one of the leading garage door technicians in Vancouver, WA?

Hazel Dell is an unincorporated area and census-designated place (CDP) in Clark County, Washington, United States, located north and west of Vancouver. As of the 2010 census the population was 19,435. Previous censuses divided the community into two areas, Hazel Dell North and Hazel Dell South.

Hazel Dell runs parallel to and is bisected by Interstate 5, with access from exits 4 and 5. The community is bounded by the Vancouver city limits on the south in the vicinity of Burnt Bridge Creek, Lake Shore to the west, Salmon Creek to the north, I-205/Barberton to the northeast, and Walnut Grove to the east. Vancouver Lake is a short distance to the west of the area, and the community of Minnehaha is to the southeast. According to the United States Census Bureau, the Hazel Dell CDP has a total area of 4.9 square miles (12.6 km), of which 0.01 square miles (0.03 km²), or 0.27%, is water.

Much of Hazel Dell is occupied by businesses and working class homes, in older, well established neighborhoods. The main business portion follows NE Highway 99, just east of I-5, generally, from 63rd to 99th Street, with businesses east and west of Highway 99 on NE 78th and 99th streets. There are fewer businesses and shopping centers along NE Hazel Dell Avenue, just west of I-5, scattered from 63rd to 99th Street. Hazel Dell's businesses and services include several retail, restaurant, and grocery chains, convenience stores, used car dealerships, auto parts stores and auto repair shops, pawn shops, barber shops, taverns, lounges and pubs, and motels, as well as many other franchise eateries, several banks and realty, medical and dental offices.

Law enforcement for the community of Hazel Dell is provided by the Clark County Sheriff's Office, and the local crime rate is typical for a neighborhood of its size and population density. Fire Station 61 on Hazel Dell Avenue operates as part of Clark County Fire District 6 and provides firefighting services to Hazel Dell and neighboring communities. Hazel Dell has its own sewer district as well.

Construction of Kate and Clarence LaLonde Neighborhood Park was to begin in early July 2010.

Hazel Dell Community Park is located at 2300 NE 68th Street.

Developed in 2007, the Tenny Creek Neighborhood Park is located along NE 88th Street.

Jorgenson Park NW 3rd Ave. / NW 70th St.

Hazel Dell Elementary School is a kindergarten through 5th grade elementary school located at NE Hazel Dell avenue and Anderson road within the residential area of south Hazel Dell and is part of the Vancouver School District. The school is home to the "Panthers". The current principal is Lisa Reed.

Sacajawea Elementary School is a kindergarten through 5th grade elementary school located within a residential area of northwest Hazel Dell, and is part of the Vancouver School District. The school is home to the "Skyhawks".

Sarah J. Anderson Elementary School is a kindergarten through 5th grade elementary school located within a residential area of northeast Hazel Dell and is part of the Vancouver School District. The school is home to the "Pioneers". The current principal is Katie Arkoosh.

Columbia River High School is a 9th through 12th grade high school located at NW 99th Street within the residential area of Hazel Dell. The school was formerly home to the Chieftains, however, as of 2021, Columbia River High School is now the home of the Rapids.

Oregon Country pioneers Reese and Sarah J. Anderson were Hazel Dell's first settlers. Sarah named the area after a stand of filberts on their land near what is today 78th Street and Highway 99. She also donated the land for the first school in Hazel Dell. The name "Bear Gulch" was briefly considered by the early Hazel Dell residents.

Hazel Dell and Minnehaha were two of the first suburban areas to be developed after World War II and were followed by Lake Shore, Felida, and Salmon Creek. Much of the housing boom in this area has subsided due to the increase of homes being built to the east of Vancouver, between Interstate 205 and Camas and Washington State Route 500/Fourth Plain Boulevard and the Columbia River.

Until the early 1970s, it was not uncommon to see horses and dairy cattle at several points along Interstate 5 and Highway 99 where there are now shopping centers. There are now only a few small acreage farms left in Hazel Dell and no dairies at all.

Every third Saturday in May since 1964, Hazel Dell has hosted the "Parade of Bands". The parade route follows Hwy 99 North to 78th Street, west to Hazel Dell Avenue, south to 63rd Street and back to Highway 99. The parade was first organized and sponsored by Harvey Johnson and family who owned the now demolished Steakburger Drive-in restaurant on Highway 99.

Local business leaders once considered changing the name to "Basilville" in honor of enterprising merchant Basil Dhanens. With thanks, Dhanens declined the offer. He died in 1972.

Services Near Me

Commercial Garage Door Installation in Hazel Dell, Washington

Commercial Garage Door Installation

Commercial Garage Door Installation is a major investment for business owners, so it's essential to select the right product and install it correctly. Professionally installed commercial doors will last long, saving you money in the long run by avoiding expensive repairs and maintaining safety on your premises.

Commercial garage doors come in a wide range of shapes, sizes and materials to meet your individual requirements. Plus, they can be custom-designed to adhere to industry-specific regulations and standards, so you get exactly the right door for your facility.

Residential garage doors may only open and close a few times each day, while commercial doors must be opened and closed multiple times daily - sometimes more frequently if your business requires regular delivery of supplies and products. That is why regular inspections and maintenance of your commercial garage door should be a top priority.

Types of Commercial Garage Doors

The traditional overhead style is the most common commercial garage door, which hangs over an opening or storefront. These steel garage doors provide sturdy construction that can withstand repeated use. Plus, they're easy to clean and maintain - especially beneficial if your business has high foot traffic.

Another popular choice is a commercial sectional door. These are similar to residential overhead garage doors in that they're constructed of wide steel sections, but commercial sectional doors also have an integrated track that stores away when not in use.

These doors are an ideal choice for businesses that need quick access to the outside, like restaurants and retail shops. Not only do they let in natural light and improve air flow in the room, but also feature insulation which helps save energy and cooling costs.

Are you a small, medium or large business owner seeking to upgrade the security and safety of your building? Get in touch for a free estimate on commercial garage door installation. Our team of experts will assist you select the ideal door for your space, ensure it meets all requirements and budget, then install it quickly and securely.

When installing a commercial garage door, the amount of time it takes depends on both the type of door needed and the existing condition of your garage. If the existing door is in good condition, replacement should take no more than several hours by an experienced company. However, if it needs replacing due to damage or age, work may become more complex and take more time.

Costs for Commercial Garage Door Installation

The price of a new commercial garage door depends on several factors, such as its design and material. A basic model with no windows or insulation may cost as little as $500 while higher-end models come at much higher costs. Furthermore, whether or not you wish to add extra features like windows and insulation will affect the final cost.

Garage Door Panel Repair in Hazel Dell, Washington

Garage Door Panel Repair - How to Fix a Dent

Panels form the mainstay of your garage door, keeping it safe and secure while adding to its aesthetic appeal.

Garage doors come in a range of materials, such as wood. Depending on the style and material of your door, you may have several options for repairing or replacing its panels.

1. DIY: Do It Yourself

If you are experienced working with tools and can perform minor repairs on your own, fixing a damaged garage door panel may not be too difficult for you. However, be mindful of safety precautions and make sure all necessary tools are available.

2. If you don't know how to tackle it yourself, contact a professional who can take care of the task for you.

3. Repairing a Dent: When It's Possible

When your garage door panel has been dented, it may be more cost-effective and easier to repair the affected area than replace the entire panel. Dents can be caused by hailstones or other storm debris, physical objects like balls that get kicked into the door, or even just from impact from cars.

4. If you don't have access to a hammer or other tool, heating the dent may be enough to straighten it out in its upright position.

5. Metal doors with dent can be repaired using adhesive.

6. If your wooden door is older, you may need to replace the entire panel.

7. If the dent is minor, you can use aluminum foil to apply heat to it and restore its original look. This will help straighten out the area and restore your car's paint job back to new.

8. If the dent is extensive, you can hire a company to repair it for you.

9. The most frequent cause of garage door denting is accidental impact from a vehicle.

Denting in your panel can be both frustrating and irritating. It could also lead to other issues, such as the door buckling or damaging other components of the interior.

It can be challenging to tell whether your panel is actually broken or just showing signs of wear and tear, so take the time to inspect it regularly.

Once you determine how severely damaged a panel is, it's essential to get it repaired promptly in order to avoid further harm and extend the lifespan of your garage door.

Once you know how much it needs replacing, begin searching for a replacement panel that matches your garage door's size and shape. Aesthetics are usually top of mind when selecting a new garage door, so finding one that matches what you currently have can be an advantageous move.

Panel replacement costs can range anywhere from $200 to $800, so it's essential that you consider the total cost when making your decision. Include labor, setup and mobilization fees as well as any extra charges associated with hiring a general contractor to oversee the project.

Garage Door Installation in Hazel Dell, Washington

When it comes to Garage Door Installation, Texas has a wide range of options for homeowners to choose from. Whether you’re looking for something fancy or functional, our team of experts will work with you to find the best solution for your home or business in a timely manner.

Garage Door Installation - Choosing the Right Garage Door for Your Home or Business

Choosing the right garage door for your home can greatly enhance the curb appeal and property value of your location. Moreover, new garage doors can dramatically increase your energy efficiency, improve safety and security, and reduce the likelihood of damage to your home or other important assets from a faulty or malfunctioning unit.

The right garage door is one of the most important investments you can make for your home. Our experts will help you determine the perfect style, material, and function to fit your practical and aesthetic needs while also ensuring a high level of durability and performance.

You can also select from a variety of other features that will make your new garage door stand out from the rest. These include openers, sensors, door locks and more.

Our experts are well versed in all the latest and greatest technology that will ensure your new door is installed correctly, safely, and effectively. Additionally, our experts are highly experienced and trained to handle the most complex and delicate tasks.

We’ll even come directly to your property, outfit you with a brand-new garage door of a make, model, and style that perfectly matches your practical and aesthetic requirements – so that you can enjoy a functional and convenient new addition to your home or business without any hassles.

Top of the line products from leading manufacturers like Lift Master and Genie are sure to be a smart investment. These products are known for their nifty features, such as wireless remote-control capabilities and intelligent sensors that can detect a vehicle’s position and automatically close or open the garage door.

The best part about our top-of-the-line products is that they are all made to last! We’ll give you a manufacturer’s warranty, so you can rest assured that your new garage door will be a durable and reliable addition to your home or business for years to come.

Our company is a family owned and operated business, so you can be sure we will always take pride in delivering the best possible customer service. Our friendly and knowledgeable technicians will work hard to answer all your questions in a timely manner.

Garage Door Maintenance in Hazel Dell, Washington

Simple Garage Door Maintenance You Can Do Yourself

The garage door is an important part of your home, and it can be a safety hazard if you don't keep it maintained. If you haven't had a professional tune up your garage door in a while, there are some simple maintenance steps you can perform yourself to help improve your safety conditions and decrease repair costs for years to come.

Visual Inspection

A visual inspection of the garage door is a must every six months. Look for peeling, fading or cracking that could affect your curb appeal and cause moisture to leak into your garage. Also, check your weatherstripping for tears or rips that can allow moisture to enter your garage and encourage mold growth.

Adjust the Photo-Eye Sensors

A common problem that causes garage doors to not automatically reverse is a misalignment of the photo-eye sensors. To fix this, remove any debris and clean the sensors. Then, realign them until the indicator light no longer flashes.

Tune Up Your Spring System

The springs on your garage door help it raise and lower. Regularly checking and maintaining the springs can keep them in good condition and extend the lifespan of your door. You can do a simple test to see whether or not your springs are properly balanced by pulling the release handle when you shut the door, then lifting it halfway up. If it stays in place, it's balanced; if it starts to slowly rise or drop, the springs are worn and need to be replaced.

Grease Your Overhead Springs and Chain or Screw

Keeping your garage door parts greased up will help them last longer and prevent corrosion. You can do this by spraying a white lithium grease, available at your local garage door specialist, on the opener's chain or screw. Then, you can add some spray lubricant to the springs.

Inspect the Tracks and Lift Cables

When your garage door is closed, it rests on the horizontal tracks that are attached to the wall on either side of your opening. The tracks can be damaged from rust or other damage, and they'll affect how your door opens and closes. Inspect the tracks for bending, rust or other signs of damage and contact a professional to repair them if necessary.

Install a Weather Seal Strip

The rubber weather seal strips on your garage door's bottom help keep water and other outside elements out of your garage. They're available at hardware and home improvement stores in different sizes, and can be installed in just a few minutes. They're a simple way to save energy and keep out unwanted drafts, insects and rodents.

Inspect Your Hinges and Vertical Tracks

When the hinges on your overhead door panels bend or sag, you'll need to replace them with new ones. Inspect the jamb brackets and strut that connect the vertical tracks to the framework on either side of your garage opening for excessive wear or dents.

If you notice a gap or tear in the weather seals or weather stripping, call a professional to have them replaced. This will ensure that you're not having to pay for repairs in the future, and will help keep out unwanted insects, critters and water from entering your garage.

Opener Installation in Hazel Dell, Washington

The garage door opener is one of the most important parts of a garage door system. If it's not installed correctly, it can cause damage to other components and make your garage door more difficult to open and close.

How to Properly Install a Garage Door Opener

When buying an opener, choose the right type for your home — whether it's a belt-drive, chain-drive, or electric opener. The type of opener you choose should be based on the size of your garage and the style of the door it will be opening, as well as your budget.

1. Consider a Pro Installation

For heavy doors or those with tall, steep sides, it's best to hire a professional for opener installation. They'll be able to install the opener in a safe, fast, and efficient manner.

2. Check Your Spring and Rollers

It's a good idea to have a professional check out your current opener before installing a new one. They'll be able to diagnose any issues and ensure that your door is working properly.

If your door doesn't open as easily or loudly as it should, start by checking for broken or wobbly rollers and brackets. Also, check the torsion spring (mounted on the header above the door opening) for breaks in the coils. If you find a spring that is broken, replace it as soon as possible, or else your garage door may stop working completely.

3. Adjust Your Opening Force

If you have a manual opener, take a look at the instructions to see where the opening force adjustment screws are located. If the screw isn't in its proper position, turn it just a little to the left or right until you have the force you want.

4. Check Your Safety Systems

If your opener has a safety reverse system or an electric eye, it's important to make sure they're functioning properly. It's recommended to check them every month and readjust them if necessary.

5. Change Your Wires

If the wires that run from your opener to the photo eyes and the wall button are exposed, you should replace them with new ones. These wires have probably been in your garage for a long time and they're likely to be nicked or worn. It only takes about 15 minutes to run a new wire, but it's worth the cost and inconvenience to prevent damage to your garage door.

6. Test Your Remote Control

If you have a remote opener, test it to see if the button works. If it's not working, call a technician for repair or replacement.

7. Test Your Garage Door

Once you've had your new garage door opener installed, it's a good idea to test it out by opening and closing it manually. If you notice a significant amount of resistance when the door is opened, it could be caused by your finger getting caught in the track.

If you have any questions about your garage door or opener, don't hesitate to contact us at AAA Garage Door Inc. We'll help you get your door and opener in top working condition again.

Opener Repair in Hazel Dell, Washington

If your garage door opener isn't opening all the way, making strange noises or not working at all, you need to have it repaired immediately. Having your opener repaired can save you money, ensure safe operation and increase the lifespan of the machine.

Garage Door Opener Repair Symptoms

If the door won't open all the way or make a loud noise, it's likely an issue with your motor or chain drive. We'll repair the motor or chain drive to restore function so you can use your garage door opener again with ease.

Usually this is an easy fix and can be done by anyone with basic DIY skills.

The most common cause of a broken garage door opener is a bad main gear drive. This is the plastic gear that comes in direct contact with the worm drive on your motor. If your garage door opener makes a grinding noise but the door won't move, it's probably time for this component to be replaced.

This is a bit more complicated than the other repairs in this article but still fairly simple to do by yourself.

Besides repairing the main drive gear, you can also fix the trolley carriage and the rail that attaches to it. You'll need to remove your opener's header bracket and disconnect the trolley from the motor and then slide off the old one and replace it with a new one.

Another simple and affordable repair to make is to replace the weather stripping around your garage door. This helps to seal the gap between your garage floor and the door, which can prevent your opener from slipping off its track.

You should have your door inspected at least once a year to make sure it's in good condition. It's also a good idea to have it serviced by a professional to ensure there are no problems with the tracks, rollers or springs that will cause damage to your door or opener.

A broken garage door opener can be dangerous. The opener's motor hoists a heavy door up and down the tracks multiple times a day, so it can exert an incredible amount of stress on the parts.

This can damage the tracks, causing them to bend or break. It can also make the door difficult to open and close.

Other possible signs that your opener needs to be repaired include a faulty keypad, remote control or wall control panel, damaged safety eyes, and a malfunctioning logic board. Having these components fixed or replaced by your Precision Garage Door Technician will help restore functionality and ensure your opener continues to operate safely.

Regardless of the type of garage door opener you have, Precision is always prepared to perform any necessary garage door opener repairs and maintenance. We have the tools and skills to provide quick and efficient service for a variety of brands, including LiftMaster, Wayne Dalton, Chamberlain, Genie, Stanley and more.

Residential Garage Door Installation in Hazel Dell, Washington

Residential Garage Door Installation is a home improvement project that can add value to your property and make your life easier. A new garage door is also an important safety feature for your home, so be sure to invest in the latest technology.

Residential Garage Door Installation

Before deciding to install a new garage door, it's crucial to consider several factors: type of door, size and weather conditions. These will influence the time and labor costs for your project.

The most common types of garage doors include single panel, sectional and swing-out/sliding. Each type of door has its own unique features and benefits.

Single Panel

Composed of a single panel, a single-panel door is the least expensive to install. They're typically priced from $400 to $1,000, but can vary greatly depending on the style and manufacturer.

Swing-out/Sliding

A swing-out or sliding door is a more common type of garage door and usually includes a curved section that can be opened like a regular door. They can be as costly as $1,000 to $2,000, but can add significant visual appeal to your home.

Sectional

A sectional garage door is a popular choice and is the most commonly installed door in the United States. Each section of the door is connected with hinges that bend over a curved track. This allows the door to sit parallel to the ceiling when fully open and in line with the walls when completely closed.

Attach the upper and lower tracks to the wall with 5/16" x 1-1/2" lags. Ensure the upper and lower sections are parallel with the flag bracket at the top of the track. Next, secure the end bearing plate to the horizontal section with one 3/8" bolt. When tight, the flange should be even with the flag bracket and pointing away from the door.

BOTTOM SECTION

To complete the bottom section, first attach the hinges with 2 lags per stile, even with the bottom corner of the door section. Then, slip the looped cable ends onto their studs on the bottom fixtures. Once that's done, lag the rollers on each of the stiles with two lags, leaving an extra 1/2" at each end.

Winding the Springs

To wind up the springs, insert a bar into the hole on the casting and crank it out and up until you feel the cast end begin to move inward toward the shaft. Then, turn down the set screws until they contact the shaft, then 1-1/2 to 2 turns more.

When you're finished, tighten the set screws until they're snug. This will give you a good idea of how well the springs are tensioned.

If you're installing a spring-tensioned door, be sure to use the right size springs. The stronger the springs, the more force they'll require to open and close the door. Using the correct springs will save you money over time and help your door last longer.

Spring Repair in Hazel Dell, Washington

Garage Door Spring Repair Basics

Garage door springs are a major part of the operation of your garage doors. They extend and contract with the help of cables and pulleys to open and close the garage door. Unfortunately, they sometimes break, causing your garage door to either open or close improperly. If this happens, you can fix a broken spring yourself or call a professional. But before you start, it’s important to understand how they work and why they might need repair.

Torsion Springs

Torsion springs are used in most garage doors. They are mounted on the wall above the garage and extend or collapse with the help of cables and pulleys attached to the horizontal tracks that run through the ceiling of the garage. A damaged or broken torsion spring can cause the door to open or close erratically or not at all.

Depending on the size of your garage, you may have one or two torsion springs. If you have a single torsion spring, it will be attached directly to the door, while if you have a double torsion spring, it will be connected to the cable and pulleys in the track.

It’s a good idea to replace torsion springs as soon as they are damaged or break, and that includes the ones that are closest to the motor. If you do not, you could end up putting unnecessary stress on the motor and damaging it.

If you’re inexperienced with spring repairs, it’s a good idea to hire a professional. They have the proper tools and training to complete the job safely.

Compression Springs

Coil springs, which are found on many vehicles, work in conjunction with shocks and struts to maintain suspension movement. They absorb shock and force, allowing the truck to smoothly shift over bumps and dips on the road.

These springs are not only essential in a vehicle’s suspension, but they also help to prevent the wheels from rubbing together. If a coil spring is damaged or worn, it will not be able to do its job effectively, and your vehicle’s suspension will fail.

To keep your coil springs in tip-top condition, it’s a good idea to spray them with a silicone-based lubricant three or four times per year. This will keep them from rusting, which can significantly shorten their lifespans.

You should replace your coil springs in pairs—for example, both front coil springs—to ensure the entire car rides evenly. This will allow your vehicle to run at its best.

If you don’t know what type of spring your garage door requires, it’s a good idea to ask the professionals at White’s Automotive Center. They will be able to provide you with the right replacement springs for your specific model of door.

There are three common types of extension springs: open-looped, double-looped and clipped. Each has its own strengths and weaknesses, so it’s important to choose the right one for your needs. You can purchase replacement springs from your local hardware store or through a manufacturer. However, it is more cost-effective to buy them from a company that specializes in garage door springs. They will have them in stock and can easily answer your questions.